Comments on: Kodiak Bruin 9500 Winch http://www.ality.org/2009/07/kodiak-bruin-9500-winch/ ɹǝʌo ǝɯ uɹnʇ - sıɥʇ pɐǝɹ uɐɔ noʎ ɟı Fri, 13 Jan 2012 07:48:43 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: DIY Welders http://www.ality.org/2009/07/kodiak-bruin-9500-winch/comment-page-1/#comment-835 DIY Welders Fri, 26 Mar 2010 05:46:06 +0000 http://www.ality.org/?p=444#comment-835 I was looking for DIY related articles this was excellent I was looking for DIY related articles this was excellent

]]> By: admin http://www.ality.org/2009/07/kodiak-bruin-9500-winch/comment-page-1/#comment-407 admin Mon, 10 Aug 2009 18:33:57 +0000 http://www.ality.org/?p=444#comment-407 Just a cautionary note - this past weekend at ACE2009 in Grande Cache, the winch cable became unspooled when we were doing a self recovery when I become real stuck in some muskeg. After getting unstuck, we were spooling the cable back out to get it re-wound properly, and the end of the cable came loose out of the clip that attached the cable to the winch drum. Just a cautionary note – this past weekend at ACE2009 in Grande Cache, the winch cable became unspooled when we were doing a self recovery when I become real stuck in some muskeg. After getting unstuck, we were spooling the cable back out to get it re-wound properly, and the end of the cable came loose out of the clip that attached the cable to the winch drum.

]]> By: Ray http://www.ality.org/2009/07/kodiak-bruin-9500-winch/comment-page-1/#comment-372 Ray Sun, 12 Jul 2009 03:47:52 +0000 http://www.ality.org/?p=444#comment-372 Well, between laying a new floor in my sons room, and working on the Jeep, I managed to get the bumper removed, holes drilled into the frame for the winch plate, and a bit of metal trimmed off the top of the frame rails to allow for the winch plate. A pretty good day! Tomorrow, get the winch mounted, wired up, and the bumper back on! Should be busy! Oh yeah, gotta put baseboards in my sons room too! Well, between laying a new floor in my sons room, and working on the Jeep, I managed to get the bumper removed, holes drilled into the frame for the winch plate, and a bit of metal trimmed off the top of the frame rails to allow for the winch plate. A pretty good day!

Tomorrow, get the winch mounted, wired up, and the bumper back on! Should be busy! Oh yeah, gotta put baseboards in my sons room too!

]]>