Progress on the tables

Have been negligent in posting updates on the side tables and coffee tables that Keith and I have been working on – Keith has been doing the lions share of the work – and I’ve been helping after I finish work when I can, and on the weekends.
I was experimenting with a staining technique that I saw on a recent episode of ‘Ellen’s Design Challenge’.  A solution of iron acetate is brushed onto the wood, and it reacts with the tannins in oak, darkening the wood as the solution dries.  The effect is quite dramatic!
IMG_0397
These pieces of wood have been brushed with the solution.  The shinier surface the oak is sitting on is my cedar desk, which was brushed with Minwax Ebony stain, and then a coat of semi-gloss varathane.
The solution is easily made simply by ripping up a couple pieces of clean 0000 steel wool and placing the pieces into a glass jar (I used a 1 litre mason jar).  Fill the jar with household white vinegar.  Fold a plastic straw in half and use the ends to push the steel wool down, so it’s completely submerged in vinegar.  Seal the jar, and punch a few holes in the lid – this is important – otherwise you could end up with an explosion of glass & vinegar solution!

IMG_0386Here’s a side table all assembled, and waiting for stain.

IMG_0422
Here are all three tables, stained and getting the first coat of a satin polyurethane.  I’m second guessing myself as to the finish – I may end up adding a final coat of semi-gloss – but we’ll see how the satin finish looks once we get the tables set up in our living room!